Similar to:
UNS S32550 / S32520
UNS S32750 / AISI-F53 / 1.4410
Z3CNDU25.07Az
X2CrNiMoCuN25.6.3
1.4507
Uranus 52N
SAF 2507 SANMAC
Zeron 100® - FERRALIUM 255-SD50®
|
Supplied as:
Rolled - forged round bar, solution annealed. Supplied in commercial length or cut to size.
Certified according to EN 10204 3.1.
NACE MR0175 -NACE MR 0103 - Norsok up to Ø 320 mm.
Only Western Europe origin material.
|
Stock
| ∅12,7mm |
∅70mm |
∅140mm |
∅240mm |
∅450mm |
| ∅15,88mm |
∅75mm |
∅150mm |
∅250mm |
∅475mm |
| ∅20mm |
∅80mm |
∅155mm |
∅262mm |
∅500mm |
| ∅25mm |
∅85mm |
∅160mm |
∅275mm |
|
| ∅30mm |
∅90mm |
∅165mm |
∅287mm |
|
| ∅35mm |
∅95mm |
∅170mm |
∅302mm |
|
| ∅40mm |
∅100mm |
∅180mm |
∅315mm |
|
| ∅45mm |
∅105mm |
∅190mm |
∅335mm |
|
| ∅50mm |
∅110mm |
∅203,2mm |
∅350mm |
|
| ∅55mm |
∅115mm |
∅212mm |
∅375mm |
|
| ∅60mm |
∅120mm |
∅222mm |
∅400mm |
|
| ∅65mm |
∅130mm |
∅230mm |
∅425mm |
|
Download fully detailed stock list:
https://www.specialsteelstock.com/it/area-download/scarica-stock-list.html
Properties:
Ferritic-austenitic stainless steel.
Excellent corrosion resistance against general corrosion, stress corrosion cracking, corrosion fatigue, pitting, crevice and erosion corrosion and possessing very high mechanical strength properties.
Good weldability, post weld heat treatment not necessary.
Max. temperature for long periods of service: 280 °C (536 °F)/(300 °C/ 572 °F possible for short periods).
Surface condition for optimum corrosion resistance: pickled or machined.
Applications:
Components in offshore, oil&gas, waste water, sea water desalination and chemical plants with aggressive chloride-containing media e.g. heat exchangers, separator parts, compressor and pump components, turbine blade, green energy field, pulp&paper, food industry.
Chemical Compositions (average):
| Element |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Ni |
W |
Cu |
N |
| |
0,02 |
0,25 |
0,55 |
0,025 |
0,005 |
25,20 |
3,70 |
7 |
0,65 |
0,60 |
0,22 |
Mechanical & physical properties:
| Pren |
Min. 40 |
| Yield strength 0,2% (N/mm2) |
Min. 550 |
| Ultimate tensile strength (N/mm2) |
Min. 750 |
| Reduction of area |
Min. 45 |
| Elongation % |
Min. 25 |
| Hardness (HBN) |
Max 270 |
| Density |
7.8 kg /dm³ |
| Magnetic permeability |
33 |
| Thermic conductivity |
14,0 (W.m.K.) |
| Specific heat |
475 Joule (kg.K) |
| Electric resistance |
0,80 Ω mm²/m |
| Modulus of elasticity |
205 x 10³ N/mm² |
| Magnetic characteristic |
Magnetic |
| Heat treatment |
Solubilization 1100° C/ H20 |
Trademarks notice:
some names are registered trademarks of specific manufacturers. Trademark Zeron 100 is registered by Rolled Alloys Ltd.
SpecialSteelStock C.S.C. Spa is not affiliated with any manufacturers. Names are listed solely for reference to help identify products consistent with listed specifications.
The present datasheet is intended to give a survey of the characteristics of this material. SpecialSteelStock C.S.C. spa is not liable in case of inaccuracy.
Stainless steel, Acier inoxydable, Rostfreier Stahl, Aco Inoxidável, Acero Inoxidables, Roestvrij staal, Paslanmaz çelik, Нержавеющих сталей, ανοξείδωτο χάλυβα, Rustfritt stål, Rostfritt stål, Rustfrit stål, Nerez, Rozsdamentes acél, Stali nierdzewnej, Ruostumaton TerÄs, الفولاذ المقاوم للصدأ
